1/2 In. X 1/2 In. Barb 90 Deg. Brass Pex Elbow (1/4 Bend) (10-pack)

Description

SharkBite 10 Pack 1/2″ Lead-Free Brass Barb Insert Elbow. It is for connecting 2 pieces of 1/2″ cross link polyethylene Pex tubing. Secure barb ends of fittings to Pex pipe with TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool. Immediately testable to well over 100 PSI. Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for Lead-Free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet AB1953 California & VT S152 Vermont low lead restrictions.

10 Pack

1/2 in.

Lead free brass

For connecting 2 pieces of 1/2 in. cross link polyethylene Pex tubing.

Secure barb ends of fittings to Pex pipe with TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, or copper crimp rings & crimp tool.

Immediately testable to well over 100 PSI.

Meets the new NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard for products intended for the transport of potable water, ANSI/NSF Standard 61 Annex G for lead free compliance & the wetted surface of this product contacted by consumable water contains