Chain Link Drive Gate, 10 Ft. X 60 In.

Description

Midwest Air Tech 10′ Opening x 60″ Chain Link Drive Gate. This 11.5 gauge galvanized steel gate is 114″ in width and 58″ in height. It consists of 2 panels with a combined width of 6 inches less than the opening, allowing 2 inches on either side for the hinge hardware and 2 inches in the middle for the locking or latch mechanism. When installing, a 2-inch gap is recommended between the bottom of the gate and the ground to allow for the gate to swing freely. Hardware is not included.

10 Ft. Opening

60 In.

Made from 11.5 gauge galvanized steel.

114″ in width and 58″ in height.

Consists of 2 panels with a combined width of 6 inches less than the opening, allowing 2 inches on either side for the hinge hardware and 2 inches in the middle for the locking or latch mechanism.

2-inch gap is recommended between the bottom of the gate and the ground to allow for the gate to swing freely.

Hardware is not included.