Pex Pipe Tee, Lead-free Brass, 1/2 X 1/2 X 3/4 In. Barb

Description

SharkBite 1/2″x1/2″x3/4″ Brass Lead-Free Barb Pex Tee is designed to make a 3/4″ branch off a 1/2″x1/2″ run for use with Pex tubing. It is connected with stainless steel cinch clamps and cinch tool TV# 608743. The tee meets ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circulated. The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight. It meets AB1953 California & VT S152 Vermont low lead restrictions.

1/2 in. x 1/2 in. x 3/4 in.

Brass

Lead free

Used to make a 3/4 in. branch off a 1/2 in. x 1/2 in. run for use with Pex tubing

Connected with stainless steel cinch clamps and cinch tool TV# 608743.

Meets ASTM F-876, ASTM F-877 to SDR-9 dimensional standards, NSF 14 & 61 for use in potable water systems, CSA B137.5 standards, NSF CL-R certified for use in hot water systems where chlorinated 140 degrees Fahrenheit hot water can be constantly re-circul

The wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight.

Meets AB1953 California & VT S152 Vermont low lead restrictions.